Chermside West, QLD · 4056

Concreting Cost in Chermside West

Use our free cost estimator to get accurate concreting price ranges for Chermside West, QLD. Prices are adjusted for local market rates.

Brisbane market rates

Updated 2025

Verified by local tradies

Concreting Cost Estimator — Chermside West

Adjust the options below to estimate your job cost

1. What type of concreting job?

2. Quantity (m²)

3. Job complexity / type

Estimated Cost in Chermside West

Budget

$1.8k

Average

$2.7k

Premium

$4.1k

20 m²QLD market rate appliedDecorative / Exposed Aggregate

These are estimates based on Chermside West market data. Actual costs depend on your specific job, materials, and tradie.

Get Free Quotes from Chermside West Tradies

Concreting Price Guide — Chermside West, QLD

All prices adjusted for QLD market rates

Job Type	Budget	Average	Premium	Unit
Driveway (per m²)	$65	$95	$145	per m²
Path / Footpath (per m²)	$55	$82	$130	per m²
Shed Slab (per m²)	$60	$88	$135	per m²
House Slab (per m²)	$80	$120	$185	per m²
Exposed Aggregate (per m²)	$90	$135	$210	per m²
Stencilled Concrete (per m²)	$85	$128	$200	per m²
Concrete Removal (per m²)	$35	$58	$95	per m²
Concrete Cutting (per m)	$25	$42	$70	per metre

Prices are estimates for Chermside West, QLD based on 2025 market data. Actual costs vary by job scope, materials, and tradie experience.

What Affects Concreting Cost in Chermside West?

1.4x

Decorative / Exposed Aggregate

Decorative finishes require more skill and time

1.3x

Reinforced Structural Slab

Structural slabs require engineering and more steel

1.2x

Difficult Access

Tight access for concrete trucks increases cost

Standard Driveway

Standard plain concrete driveway or path

Money-Saving Tips for Concreting in Chermside West

Concrete prices fluctuate with cement costs — get quotes within 30 days

Control joints prevent cracking — make sure your quote includes them

Decorative concrete costs more but adds significant kerb appeal

Allow 28 days for concrete to fully cure before heavy use

Check if the quote includes excavation and base preparation

Concreting Cost FAQs — Chermside West

How much does a concrete driveway cost in Australia?

A concrete driveway costs $3,000–$10,000 for a standard double driveway (40–60m²). Plain concrete costs $65–$95/m², while decorative options like exposed aggregate or stencilled concrete cost $90–$145/m².

How much does a concrete slab cost?

A concrete shed slab costs $60–$135/m². A house slab costs $80–$185/m² including reinforcement and formwork. A standard 10×6m shed slab costs $3,600–$8,100.

How long does concrete take to cure?

Concrete reaches 70% strength in 7 days and full strength (28-day cure) in 4 weeks. You can walk on it after 24–48 hours and drive on it after 7 days, but avoid heavy loads for 28 days.

What is the difference between plain and exposed aggregate concrete?

Plain concrete has a smooth or broom finish and costs $65–$95/m². Exposed aggregate reveals the stone aggregate for a decorative finish and costs $90–$145/m². Exposed aggregate is more slip-resistant and popular for driveways and pool surrounds.

Do I need council approval for a concrete driveway?

A new driveway crossing (from the road to your property) typically requires council approval and a crossing permit. Resurfacing an existing driveway within your property usually does not require approval.

Prices shown are estimates for Chermside West, QLD based on 2025 market data. For an accurate quote specific to your job, post your project free on TradeVault and receive quotes from verified local tradies.